Most Indian manufacturers give discounts after the invoice has gone out: a quarterly rate cut from an OEM, a monthly volume rebate, a price allowance on a lot with a minor deviation. Until now, GST let you reduce taxable value for such a discount only if it was agreed before or at the time of supply and linked to specific invoices. Many discounts failed that test, so suppliers paid GST on the full value and used a "financial" credit note instead.
That changed on 1 November 2026. Sections 153 to 155 of the Finance Act, 2026 came into force on that date, amending section 15(3)(b), section 34(1) and section 54 of the CGST Act (CalcGuru summary of Notification No. 03/2026-Central Tax, Taxscan). At the same time, 30 November 2026 is the statutory cut-off for several FY 2025-26 actions. This article explains both and shows where an ERP helps.
This article explains the law in general terms and is not tax advice. Confirm how it applies to your transactions with your Chartered Accountant.
What Changed on 1 November 2026
The amendments were proposed in the Finance Bill, 2026 and analysed in detail in The Chartered Accountant journal of ICAI. As notified, they do four things:
- Section 15(3)(b), post-sale discounts. A discount given after supply is excluded from the value of supply if the supplier issues a credit note under section 34 and the recipient reverses the input tax credit attributable to the discount. The earlier conditions, a prior agreement and linking the discount to specific invoices, have been dropped.
- Section 34(1), credit notes. A discount under section 15(3)(b) is now an express ground for issuing a GST credit note.
- Section 54(6), provisional refunds. The 90% provisional refund, earlier available for zero-rated supplies such as exports, now extends to refunds of unutilised ITC arising from an inverted duty structure. The proper officer still applies risk checks before sanctioning it.
- Section 54(14), small refunds. The Rs. 1,000 minimum refund amount no longer applies to goods exported with payment of tax. It still applies to other refund categories.
The changes are prospective: discounts dealt with before 1 November 2026 stay under the old section 15(3)(b). The notification prescribes no rules or forms, so CGST Rules and portal changes may follow (CalcGuru). The section 34(2) time limit for declaring a credit note continues to apply.
The 30 November 2026 Cut-Off for FY 2025-26
Three different provisions share the same date for last year's transactions (Busy on section 16(4), TaxGuru annual compliance review):
- Section 34(2): credit notes for FY 2025-26 supplies must be declared by 30 November 2026 to reduce output tax.
- Section 16(4): ITC on FY 2025-26 invoices and debit notes must be claimed by 30 November 2026, or by the date the FY 2025-26 annual return is filed, if that is earlier. For monthly filers the last practical return is the October 2026 GSTR-3B, due on 20 November 2026.
- Section 37(3): errors or omissions in FY 2025-26 outward supply details in GSTR-1 can be corrected up to 30 November 2026.
Filing the annual return early brings these limits forward, so finish the clean-up below first.
Why Discounts and Credit Notes Leak Money in Factories
A discount is a commercial decision, but its GST treatment depends on paperwork. When sales agrees a rate cut on a call, margin drops at once. Whether the GST on the original invoice also comes down depends on a valid credit note, reported in time and matched by the buyer's ITC reversal. If any link breaks, the factory gives the discount and still pays tax on the full value.
Purchases mirror this. A vendor bill booked late, an invoice missing from the supplier's filing or a bill unpaid too long puts ITC at risk. These are gaps between what happened commercially and what was documented in time.
Key Takeaway: The amendment removes a legal hurdle, but money is still lost or saved in operations: whether discounts become credit notes and purchase bills are reconciled before the cut-off.
8 Problems Manufacturers Face With Discounts, Credit Notes and ITC, and How ERPDrive Solves Them
Problem 1: Post-Sale Discounts Settled Outside the GST Books
The Problem: Rate revisions, volume rebates and quality allowances are agreed on email, tracked in a spreadsheet and settled through financial credit notes. Under the old rule many could not reduce taxable value anyway, so nobody built the habit of raising GST credit notes for them.
How ERPDrive Solves It: ERPDrive raises GST invoices and credit notes from the same sales module, against the customer's ledger, with tax taken from the HSN and rate on the invoice.
The Result: Every discount has a GST document behind it, so you can decide with your CA whether to reduce output tax. See our GST invoicing guide.
Problem 2: The Buyer's ITC Reversal Is Out of Your Hands
The Problem: The value reduction still depends on the recipient reversing the attributable ITC. A large OEM buyer may take weeks to act on your credit note, and your sales team often does not know whom to ask.
How ERPDrive Solves It: Credit notes sit in the customer's ledger next to the invoices they adjust and flow into the GSTR-1 data you export, giving accounts one list per customer to follow up.
The Result: Follow-up becomes a weekly routine, not a year-end scramble. See our guide to accounts receivable management.
Problem 3: Last Year's Credit Notes Still Not Issued
The Problem: FY 2025-26 quality claims, price differences and returns are often settled late. A credit note declared after 30 November 2026 can no longer reduce the tax already paid on the original invoice.
How ERPDrive Solves It: Invoices, returns and credit notes live in one place, so your team can list FY 2025-26 invoices with pending claims and raise the credit notes now.
The Result: Fewer adjustments miss the window. See our guide to customer returns and warranty.
Problem 4: Eligible ITC Left Unclaimed
The Problem: Vendor bills reach accounts late, sit in a stores drawer after the GRN, or are booked under the wrong GSTIN. FY 2025-26 credit not claimed by the section 16(4) limit is lost for good.
How ERPDrive Solves It: Purchase orders, GRNs and vendor bills are linked, so a GRN with no bill stands out, and the GSTR-2A reconciliation report flags mismatches with what suppliers have reported.
The Result: The team chases specific invoices while ITC is still claimable. See our guides to the GRN process and month-end reconciliation.
See Invoices, Credit Notes and GSTR Data in One System
See how ERPDrive connects sales invoices, credit notes, purchase bills, GSTR-2A reconciliation and GSTR-1 and GSTR-3B exports, using your own customers and items.
Book a Free DemoProblem 5: GSTR-1 Errors From Last Year Still Uncorrected
The Problem: A wrong customer GSTIN, a B2B sale reported as B2C or a wrong HSN code means your customer cannot see the credit and your returns do not match your books. Section 37(3) allows FY 2025-26 corrections only up to 30 November 2026.
How ERPDrive Solves It: GSTINs, HSN codes and tax rates come from masters, and GSTR-1 and GSTR-3B data, including the HSN summary, is exported from the same invoices.
The Result: Fewer errors reach returns, and the rest are easy to trace. See our GSTR-1 and GSTR-3B guide and HSN code guide.
Problem 6: ITC Reversal on Unpaid Vendor Bills
The Problem: Under Rule 37, ITC must be reversed with interest if the supplier is not paid within 180 days, and can be reclaimed once paid (TaxGuru). Factories stretching payables rarely know which bills have crossed the line.
How ERPDrive Solves It: Vendor bills and payments are recorded against each supplier, so outstanding bills can be listed by age before they trigger a reversal.
The Result: Payment decisions are made knowing their GST cost. See our guide to accounts payable.
Problem 7: Inverted Duty Refunds Blocking Working Capital
The Problem: When inputs carry a higher GST rate than finished goods, ITC piles up and cash stays locked until a refund is sanctioned. The new 90% provisional route helps only if your claim data is clean.
How ERPDrive Solves It: Purchase bills carry input tax and sales invoices carry output tax by HSN and rate, in the same system and periods, so your CA gets refund data from one source.
The Result: When you decide to file, the data is ready. See our guide to working capital management.
Problem 8: Discounts That Quietly Turn Orders Unprofitable
The Problem: Even with the GST right, a post-sale discount cuts the margin on orders already costed and closed, and nobody links it back to the order or customer that needed it.
How ERPDrive Solves It: Price lists and trade schemes apply on sales orders, the Low-Profit Orders report shows which orders earned too little, and two-way Tally integration keeps the books in step.
The Result: Sales sees what each discount costs before agreeing the next one. See our guide to order profitability.
Email, Excel and Tally vs ERPDrive for Discounts and GST Adjustments
| Area | Email, Excel and Tally Alone | ERPDrive |
|---|---|---|
| Post-sale discounts | Agreed on email, tracked in a sheet | GST credit notes against the customer ledger |
| Credit note follow-up | Searched for in mail threads | Listed per customer beside the invoices |
| ITC on purchases | Bills booked when they reach accounts | PO, GRN and bill linked, GSTR-2A mismatches flagged |
| GSTR-1 accuracy | GSTIN and HSN typed per invoice | Picked from masters, GSTR data exported |
| 180-day vendor payments | Unknown until the reversal is due | Outstanding vendor bills visible by age |
| Inverted duty refund data | Stitched from several registers | Input and output tax by HSN in one system |
| Discount impact on margin | Not linked to orders | Low-Profit Orders report |
GST Adjustment KPIs Worth Tracking
Review these monthly, and weekly before a statutory cut-off. Set targets from your own baseline.
| KPI | How It Is Calculated | What It Tells You |
|---|---|---|
| Discounts without a credit note | Agreed discounts with no GST credit note yet | Tax possibly paid on value never received |
| Credit notes awaiting buyer action | Credit notes where the buyer's ITC reversal is unconfirmed | Value reductions not yet secure |
| GRNs without a vendor bill | Goods received with no purchase bill booked | ITC not yet claimed |
| GSTR-2A mismatches | Purchase bills not matching supplier filings, by value | ITC at risk until suppliers correct |
| Vendor bills unpaid beyond 150 days | Outstanding bills by age | Rule 37 reversals coming |
| Discount as a share of sales | Post-sale discounts divided by invoiced value, by customer | Which customers depend on discounts |
How ERPDrive Helps You Handle Post-Sale Discounts and the Cut-Off
Step 1: Record Every Agreed Discount as a GST Credit Note
When sales agrees a rate revision, rebate or allowance, accounts raises a credit note in ERPDrive against the customer and the related invoices.
Step 2: Follow Up Credit Notes With Each Customer
Credit notes are listed per customer beside the invoices they adjust, giving accounts one list to confirm with buyers who must reverse the matching ITC.
Step 3: Close the FY 2025-26 Gaps Before 30 November
List FY 2025-26 invoices with pending claims, GRNs without vendor bills and GSTR-2A mismatches, and clear them before the October 2026 GSTR-3B.
Step 4: Export Clean GSTR-1 and GSTR-3B Data
Invoices and credit notes take GSTINs, HSN codes and rates from masters, and ERPDrive exports GSTR-1 and GSTR-3B data from those documents for your CA to file.
Step 5: Watch the Margin Impact of Discounts
Use the Low-Profit Orders report to see which orders and customers lose margin after discounts.
A Practical Checklist for the Next Two Weeks
- Collect open discounts. Get every rate revision, rebate and allowance agreed but not yet documented.
- Separate old and new. Discounts dealt with before 1 November 2026 follow the old section 15(3)(b). Review both lists with your CA.
- Issue qualifying FY 2025-26 credit notes before 30 November 2026, or before an earlier annual return.
- Clear purchase gaps. Book pending FY 2025-26 vendor bills and resolve GSTR-2A mismatches before the October 2026 GSTR-3B.
- Correct last year's GSTR-1 for wrong GSTINs, B2B entries shown as B2C and HSN errors.
- Check vendor bill ageing and plan payments for bills nearing 180 days.
- Review inverted duty refunds with your CA under the extended provisional refund route.
For other changes this month, read our article on GST registration changes from November 2026. If you are on e-invoicing, credit notes are reported through the e-invoice system too; see our GST e-invoice guide.
Frequently Asked Questions
What changed for post-sale discounts under GST from 1 November 2026?
Section 15(3)(b) of the CGST Act was amended. A post-sale discount is now excluded from taxable value if the supplier issues a credit note under section 34 and the recipient reverses the attributable ITC. The conditions of a prior agreement and linking to specific invoices were removed.
Does the new rule apply to discounts given before 1 November 2026?
No. The change is prospective. Discounts dealt with before 1 November 2026 remain under the old section 15(3)(b), so review them with your Chartered Accountant.
What is the last date to issue credit notes and claim ITC for FY 2025-26?
Credit notes under section 34(2), ITC under section 16(4) and GSTR-1 corrections under section 37(3) share a cut-off of 30 November 2026, or the FY 2025-26 annual return date if earlier. For monthly filers, the October 2026 GSTR-3B, due on 20 November 2026, is the last practical return for ITC.
Can inverted duty structure refunds now be paid provisionally?
Yes. From 1 November 2026, section 54(6) extends the 90% provisional refund to unutilised ITC from an inverted duty structure, subject to the officer's risk checks. Supporting rules and portal changes may follow.
How does ERPDrive help with GST credit notes and reconciliation?
ERPDrive raises GST invoices and credit notes against the customer ledger, links purchase orders, GRNs and vendor bills, flags GSTR-2A mismatches and exports GSTR-1 and GSTR-3B data, with two-way Tally integration.
Conclusion: Turn Discounts Into Documents
The 1 November 2026 amendment removes conditions that many genuine post-sale discounts could never meet. The benefit reaches only factories that turn each discount into a timely GST credit note and follow it through with the buyer. This month, the more urgent job is closing FY 2025-26 before 30 November.
ERPDrive keeps invoices, credit notes, purchase bills and GSTR data in one system built for Indian manufacturers. Book a free demo to see it with your own customers and items, or message us on WhatsApp.
Sources: CalcGuru on Notification No. 03/2026-Central Tax, Taxscan, The Chartered Accountant (ICAI), Busy on section 16(4) and TaxGuru.